Testimonials by Product Use

Giants Stadium - AQURON CPT-2000
America's Cup - AQURON CPT-2000
Archer Farms - AQURON SPT-1200
The Ballpark at Arlington - AQURON SPT-1200
Canterbury University - AQURON CPT-2000
Florida Condo Project - AQURON 7000 System

Aquron® CPT-2000™

AQURON® 2000 Concrete Preservation Treatment™
This Concrete Preservation Treatment is a clear, aqueous borne sub-surface molecular bonding and waterproofing solution/treatment used to seal the concrete matrix and preserve its imbedded steel.

Aquron® 2000 Cure and Seal™

AQURON® 2000 Cure and Seal™
is a liquid spray applied product that has been proven at least equal to water curing. Aquron 2000 cure & seal eliminates the cost and hassle of water curing while allowing for quicker access to the surface. Improve compressive strength, greatly reduces shrinkage cracking and seal concrete from inside out, utilize Aquron 2000 cure & seal.

Aquron® 7000™

AQURON® 7000 Concrete Soluble Chloride Reducer™
readily penetrates Portland cement concrete when applied to its surface, reducing or eliminating soluble chlorides and arresting and/or preventing corrosion of embedded steel without reducing cement paste pH value to depths of at least 3” to 6”.

Aquron® 300™

AQURON® 300 Concrete Mix Water Conditioner™
is a clear, environmentally neutral, non-toxic , odorless liquid that is added to concrete mix water to produce extraordinarily strong, hard, and impermeable concrete by utilizing greater volumes of the already included cement while still producing concrete with low water-cement ratio quality.

Aquron® 631™

AQURON® 631 Elastomeric Deck Coating™
system is an elastomeric clear waterproofing/oil repellent system of tough-curing liquid acrylic styrene curing to form an elastomeric surface membrane that provides lasting eye appealing and easy-to-clean coating for use on plazas, decks, roof terraces, balconies, parking structures, and any other concrete structure.

Aquron® 6312™

Aquron® 6312 Elastomeric Coating™
system is a non-hazardous elastomeric clear waterproofing/oil repellant system of tough curing liquid acrylic styrene and aqueous resin silicanate. The Aquron® 6312 system cures to form an elastomeric surface membrane that provides a lasting eye appealing and easy to clean clear coating.

Aquron® C-S-H-900™

Aquron® C-S-H Paste Rejuvenation Solution™
Aquron"c-s-h" 900 was developed to increase the compressive strength of existing concrete through the full depth of the pour. Spray Aquron "C-S-H"
900 to the surface of the concrete and it will start concrete hydrating again without heat.Do not rip and replace deficient concrete, Aquron it.

Aquron® Moisture Vapor-Block™

AQURON® M.V.B. Concrete Moisture-Vapor Blocker™
This Concrete Preservation Treatment is a clear, aqueous borne sub-surface molecular bonding and waterproofing solution/treatment used to seal the concrete matrix and preserve its imbedded steel.

Aquron® Surface Finisher™

AQURON® Surface Finisher™
is formulated for concrete that has already been treated with Aquron cpt-2000. Aquron concrete surface finisher for concrete will very economically add surface density to concrete While leaving a high sheen.